Alarm; Setting Alarm 1 - TechniSat TECHNIRADIO 3 Bedienungsanleitung

> Press the Select button.
> Use <Tune or Tune> to select a period after which the TECHNIRADIO 3 should
switch off. You can choose between Off, 10, 15, 30, 45 and 60 minutes.
> Press Select to apply the setting.
The remaining time is shown on the display in the top right.

9.2 Alarm

The alarm switches on the TECHNIRADIO 3 at the set time. 2 alarm times can be
programmed. The description of how to programme Alarm 1 serves as an example.
The TECHNIRADIO 3 must be supplied with power by the mains adapter to allow
the alarm to function. The alarm function does not operate in battery mode.

9.2.1 Setting Alarm 1

> In the sub-menu [System], use the <Tune or Tune> buttons to select the
[Alarm] entry.
> Press the Select button.
> Use <Tune or Tune> to select the alarm that you wish to set. In this example this
is [Alarm 1], and then the Select button again.
106
[Setting Alarm 1] appears on the display.
> Press the Select button to start the setting.
> The display shows [Tm. On 06:00], and the first digit flashes. You can now enter
the alarm time. Using the <Tune, Tune> buttons, first select the hours and press
the Select button to save.
Then enter the minutes. Again, accept this by pressing the Select button.
> Then enter the duration with <Tune, Tune>. Accept the input by pressing the
Select button.
> You then enter the source. The available options are BUZZER, DAB or FM. Press
the Select button to accept the setting. If you have selected DAB or FM, you can
then enter whether or not you want to be woken up by the last station listened
to or by one from your favourites list.
DE
EN
DA
NL
107