Ec Declaration Of Conformity; Safety Instructions - DeWalt DC940 Handbuch

E N G L I S H
EC-Declaration of conformity
DC940/DC945/DC935/DC920/DC925
D WALT declares that these power tools have been designed in compliance with: 98/37/EC, 89/336/EEC,
E
73/23/EEC, 86/188/EEC, EN 60745-1, EN 60745-2-1, EN 60335, EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3.
For more information, please contact D
L (sound pressure)
pA
Weighted RMS acceleration value
K (sound pressure uncertainty)
pA
K (acoustic power uncertainty)
WA
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 11
E
D-65510, Idstein, Germany

Safety instructions

General power tool safety warnings
Warning! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions listed
below may result in electric shock,
fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in all of the warnings listed
below refers to your mains operated (corded) power
tool or battery operated (cordless) power tool.
26
WALT at the address below, or refer to the back of the manual.
E
DC940 DC945
dB(A) 88 102
2
m/s < 2.5 17.8
dB(A) 2.8
dB(A) 2.8
1 Work area safety
a Keep work area clean and well lit.
b Do not operate power tools in explosive
c Keep children and bystanders away while
2 Electrical safety
a Power tool plugs must match the outlet.
b Avoid body contact with earthed or
c Do not expose power tools to rain or wet
DC935 DC920
102 90
21.1 < 2.5
Cluttered or dark areas invite accidents.
atmospheres, such as in the presence of
fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
operating a power tool.
Distractions can cause you to lose control.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodifi ed plugs and matching outlets will
reduce risk of electric shock.
grounded surfaces such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
conditions.
Water entering a power tool will increase the
risk of electric shock.
DC925
104
25.3