Protecting The Environment; Technical Data; Ec Declaration Of Conformity - Black & Decker REVDD12C Originalanweisungen

ENGLISH
Warning! Before performing any cleaning or maintenance on
the tool, unplug the charger.
Regularly clean the ventilation slots in your tool using a
u
soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com

Technical data

Voltage V
DC
No-load speed min
Max. torque
Nm
Chuck capacity mm
Max Drilling capacity
Steel/wood
mm
Weight kg
Integral Battery
Battery type
Ah rating
Charger
Input Voltage V
AC
Output voltage V
DC
Current mA
Approx. charge time
h
Level of sound pressure according to EN 62841:
Sound pressure (L
Sound power (L ) 70 dB(A), uncertainty (K) 5 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Screwdriving without impact (a
8
(Original instructions)
REVDD12C
0-550rpm
-1
S010*1400040
) 59, uncertainty (K) 5 dB(A)
pA
2
) 1.1 m/s , uncertainty (K) 1.5 m/s
h
Declaration of conformity
The Supply of Machinery (Safety)
Black & Decker declares that these products described under
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
For more information, please contact Black & Decker at the
12
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of
12.5/26
1-10
10/25
0.878
Li-Ion
1.5

EC declaration of conformity

230
10.8
400mA
4
Black & Decker declares that these products described
under "technical data" are in compliance with:
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products also comply with Directive 2006/42/EC,
2
2014/30/EU and 2011/65/EU. For more information, please
contact Black & Decker at the following address or refer to the
Regulations 2008
REVDD12C Drill
2008/1597 (as amended),
S.I.2016/1091 (as amended).
2012/3032 (as amended).
Black & Decker.
Director - Consumer Power Tools
Black and Decker UK, 270 Bath Road, Slough
Berkshire, SL1 4DX
%
MACHINERY DIRECTIVE
REVDD12C Drill
back of the manual.
Ed Higgins
United Kingdom
15/11/2021