Preparation For Assembly; Tools Required - Sentiotec Onni Benutzerhandbuch

Instructions for installation and use

3. Preparation for assembly

Before you begin work, check the parts list to ensure that all the individual parts
have been delivered. If you discover any missing parts, notify your dealer within
14 days of receiving the sauna cabin. Button
You need an assistant for assembly.
We also advise you to pre-drill the holes for the screws.
Check the right angle:
80 cm
Handle glass with care: Special care must be taken with the edges of
the glass – hardened glass can shatter into small pieces in the event of
impact. Insert protective cushioning (e.g: cardboard box) under the edge
of the glass.

3.1. Tools required

Screwdriver
Twist drill
Spirit level
Tape measure
Utility knife
Pencil
p. 7/8
EN
Drill
Step ladder