Range Alarm; Language; Rename Mobile Unit; Display Contrast - HumanTechnik scalla3 combo Bedienungsanleitung

3. Select »Tone Setup« and confirm with »Se-
lect«.
4. Select »Range« and confirm with »Select«.
5. Select »On« or »Off« and complete the pro-
cess with »Select«.

4) Language

The mobile phone includes a selection of 6
languages.
1. Press the »Menu« key and select the
»HS Settings« entry with
2. Press »Select«.
3. Select »Language« and confirm with
»Select«.
4. Chose the desired language with
complete the process with »Select«.

5) Rename mobile unit

The standard name of the mobile unit is
"MT n" (n is a number from 1 to 5. This
number indicates that the mobile unit is
the nth mobile unit that is registered to the
Base. MT 1 is the 1st mobile unit registered
to the Base.
The name of the mobile unit will be dis-
played in standby mode.
1. Press the »Menu« key and select the
»HS Settings« entry with
2. Press »Select«.
3. Enter the name and complete the setup
with »Save«.

6) Display contrast

1. Press the »Menu« key and select the
»HS Settings« entry with
2. Press »Select«.
3. Select "Contrast" and confirm with »Se-
lect«.
4. Choose the desired contrast from 0 to 16
with and complete the process with
»Select«.
76 English
All manuals and user guides at all-guides.com

7) Automatic call acceptance

With automatic call acceptance, you can ac-
cept a call by lifting the mobile unit from the
charging station without pressing any key.
1. Press the »Menu« key and select the
2. Press »Select«.
3. Select "Au. answer" and confirm with
4. Select »On« or »Off« and complete the
.

8) Set amplification

The normal range of the volume setting is
from 0 to 15dB. The volume can be increa-
and
sed to 15 to 30dB once the amplification has
been switched on.
1. Press the »Menu« key and select the
2. Press »Select«.
3. Select »Amplified« and confirm with »Se-
4. Select »On« or »Off« and complete the
9) Voice output mobile unit
This mobile unit is equipped with a simple
. voice output. Numbers will be read during
entry.
1. Press the »Menu« key and select the
2. Press »Select«.
3. Select "Talk Keypad" and confirm with
.
4. Select »On« or »Off« and complete the
»HS Settings« entry with
»Select«.
process with »Select«.
»HS Settings« entry with
lect«.
process with »Select«.
»HS Settings« entry with
»Select«.
process with »Select«.
.
.
.