Electromagnetic Compatibility En 60601-1-2 - KULZER Translux 2Wave Gebrauchsanweisung

Charging time of empty battery:
Environmental conditions of unit:
Weight and dimensions:
12.1

Electromagnetic compatibility EN 60601-1-2

WARNING
The device requires specifi c EMC precautions and must be installed and started up in accordance with the
GB
EMC information given in this paragraph.
Portable and mobile radio communication appliances may aff ect the correct function of the device.
- 26 -
Guidance and manufacturer's declaration – Electromagnetic emissions
The Translux 2Wave is intended for use in the electromagnetic environment specifi ed below.
The customer or the user of the Translux 2Wave should assure that it is used in such an environment.
Emissions test
RF emissions CISPR 11
RF emissions CISPR 11
Harmonic emissions IEC 61000-3-2
Voltage fl uctuations / fl icker emissions
IEC 61000-3-3
All manuals and user guides at all-guides.com
Approx. 3 hours
Charging unit: weight 450 g.
Dimensions: L 140 x W 58 x H 62 mm
Hand piece: weight 150 g (incl. light guide).
Dimensions: L 275 mm, max. ∅ 24 mm
Compliance
Group 1
Class B
Class A
Complies
Temperature
Relative humidity
Atmospheric pressure
Electromagnetic environment – Guidance
The Translux 2Wave uses RF energy only for its internal function.
Therefore it's RF emissions are very low and are not likely to cause
any interference in nearby electronic equipment.
The Translux 2Wave is suitable for use in all establishments,
including domestic establishments and those directly connected
to the public low-voltage power supply network that supplies
buildings used for domestic purposes.
Operation Transportation and
storage
10°C – 35°C –20°C – 40°C
(50°F – 95°F) (–4°F – 104°F)
45% – 85% 45% – 85%
800 – 1060 hPa 500 – 1060 hPa