Steam Ironing - Rotel STEAMIRONPROFEXTRA981EU1 Gebrauchsanweisung

• STEAM IRONING
You can steam-iron using either STEAM JETS or CONTINUOUS STEAM GENERATION.
o
To iron using steam jets, press the steam button (4, Fig. C), exerting more or less
o
pressure to regulate the desired steam rate.
Should you wish to use the maximum steam intensity, push the steam button down
o
fully. The steam flow will always remain constant, and in proportion to the pressure
you exert on the button.
To iron with continuous steam, turn the steam regulator (2, Fig. D) clockwise as
o
shown. You thus obtain a uniform and continuous flow of steam, which is at its
strongest when the steam regulator is fully rotated.
You can also increase the steam jet during continuous steam generation by pressing
o
the steam button (4).
No matter whether you are ironing using the steam jet function or with continuous
o
steam, never turn the iron upside down, or tilt it too far forward or to the side.
It must be emphasized that steam is also generated in the automatic mode during
o
short interruptions in ironing, e.g. when you are preparing the next garment to be
ironed or you briefly switch off the ROTEL STEAMIRONPROFEXTRA981EU1 and EU3.
However, if you take into consideration just how easily steam is generated manual-
ly, it is advisable to avoid automatic steam output, and thereby save energy and
steam.
When setting down the ROTEL STEAMIRONPROFEXTRA981EU1 and EU3 there is a
o
risk of it slipping!
When the water volume has completely evaporated, no more steam will be emit-
o
ted.
Caution! Before setting down the iron, always switch off the steam flow. NEVER
o
OPEN THE SAFETY CAP (1) DURING USE. FIRST SET THE SWITCH (7) TO "0" BEFORE
OPENING THE SAFETY CAP. NEXT, PULL THE POWER PLUG OUT OF THE SOCKET AND
THEN RELEASE THE PRESSURE IN THE IRON BY PRESSING THE STEAM BUTTON (4).
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
62