BEFORE FIRST USE
It is normal for small amount of smoke to be produced the first time, this will
o
quickly disappear.
When using the steam function for the first time, do not direct the steam towards
o
the laundry, as there could be debris from the steam vents.
FILLING WITH WATER
Make sure that both the Steam Control turning Knob and Temperature Control Dial
o
are in "OFF" position.
Hold the iron upright so that the water‐filling inlet is in a horizontal position.
o
Fill with water through Water Filling Inlet until the water reach the "MAX" mark
o
indicated on the side of the iron, and never fill above this mark.
SETTING TEMPERATURE
Follow the ironing instructions on the garment label. If there is no instruction but
o
you do know the kind of fabric, please consult the following table.
NOTE: If the fabric consists of various kinds of fabrics, always select the
temperature required by the most delicate fabrics.
Fabric
Synthetic
Silk, wool
Cotton, linen
STEAM IRONING
Place the iron in a vertical position and set the temperature control dial at the
o
minimum/low heat setting.
Insert the plug into the socket, and then turn the temperature control dial to the
o
"high heat" marking. The pilot light will come on, indicating that the iron is heating
up.
When the pilot light turns off, the set temperature has been reached and the iron is
o
ready to use.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
Temperature control
●
●●
●●● MAX
Temperautre requirement
Low temperature
Medium temperature
High temperature