Herunterladen Inhalt Inhalt Diese Seite drucken

Burning Brown Coal Briquettes (Tai M); Burning Anthracite Coal (Taim And Tai C) - Dovre TAI 45C Gebrauchsanweisung

Feuerstätte
Vorschau ausblenden Andere Handbücher für TAI 45C:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 98
Open stacking
If the logs are stacked openly, the wood will burn
quickly as the oxygen can reach each log easily. If
you want to use the stove for a short while, make an
open stack.
Compact stacking
If the logs are stacked tightly, the wood will burn more
slowly as the oxygen can only reach some logs eas-
ily. If you want to burn wood for a longer period, make
a compact stack.
4. Close the door of the appliance.
5. Close the primary air inlet and leave the secondary
air inlet open.
Do not fill the appliance by more than a third.
18
6. To subsequently add fuel, use the filling door of
the appliance.
Burning brown coal
briquettes (TAI M)
Brown coal briquettes burn in almost the same way as
wood. Using the primary air inlet, ensure sufficient
supply of air under the fire. For further information see
the paragraph "Burning wood".
Burning brown coal briquettes creates a lot of ash.
Regularly remove excess ash. See the paragraph
"Removing ashes" for instructions.
For the properties and use of brown coal bri-
quettes: consult your brown coal briquette sup-
plier or see the brown coal briquette packaging.
After you have followed the instructions for lighting:
1. Slowly open the door of the appliance.
2. Spread the charcoal evenly across the bottom of
the stove base.
3. Place the brown coal briquettes on the charcoal
bed.
4. Close the door.
Burning anthracite coal (TAI
M and TAI C)
When burning anthracite coal, always close
the secondary air slide and close the cover
plate (fuel selection) in the back wall.
Burning coal without bunker
After you have followed the instructions for lighting:
1. Open the primary air slide completely.
2. Slowly open the door of the appliance.
3. Spread the charcoal evenly across the bottom of
the stove base.
4. Spread a shovelful of coal on the charcoal bed and
wait with the next shovelful until the coals start to
glow.
5. Now add more coal.
Subject to change because of technical improvements

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Tai 45m

Inhaltsverzeichnis