Testing Your Anti-Bark Collar - Dogtra YS 100 Bedienungsanleitung

DESCRIPTION
Collar Strap Adjust
The collar strap of the
adjusted 3 steps as shown in the diagram above.
To adjust the collar strap, first unscrew the
contact points and put screws in desired holes,
then tighten the contact points as shown below.
36
All manuals and user guides at all-guides.com
dogtra YS300 can be

TESTING YOUR ANTI-BARK COLLAR

1. Turn the dogtra YS300
OFF & Intensity Dial and select "TEST" Level
so that the arrow on the dial is aligned with the
"test" line.
The LED indicator light will flash 1 second to
indicate that it is on, after 2 seconds it will flash
every 2 seconds. If the dog does not bark over
10 seconds, it will turn to the Sleep mode to
save battery life and the LED will turn off.
TESTING
on by turning the ON-
37