Dogtra YS 100 Bedienungsanleitung Seite 19

DESCRIPTION
Indicator Light
(LED Window)
Indicator Light (LED window)
The indicator light (LED Window) will flash 1
second when the dogtra YS300 has been turned on.
Then after 2 seconds, it will flash every 2 seconds. If
the dog does not bark over 10 seconds, it will turn to
the Sleep mode to save battery life and the LED will
turn off.
Before going into Sleep mode, the LED light
flashes green when the battery is fully charged and
turns to amber when the battery life is getting low.
When the LED indicator emits a blinking red light,
the battery needs to be recharged.
Battery life
Fully charged Medium charge Needs charge
LED window
On Working Flashes Green Flashes Amber
On Charging Stays on Green Stays on Red
34
All manuals and user guides at all-guides.com
Flashes Red
Stays on Red
Contact Points
Dogtra YS300 uses Surgical Stainless Steel
contact points to protect the dog's skin.
The length of the contact points should be well-
fitted so that the contact points are held firmly
against the dog's skin.
IMPORTANT : Avoid touching the Contact
points unless the Anti-Bark Collar is completely
discharged, or you may feel the electrical
stimulation your self.
Plastic Dummy Contact Points
If your dog is trained enough, you can replace the
Contact Points with the Plastic Contact Points
included in the package. By doing so, it will allow
you to keep the collar on your dog for a longer
period of time with less irritation on the skin. You
may also use the Pager mode as a useful tool in
correcting your dog without the stimulation,
however, only leave the collar on for 8-hours at a
time if the stainless steel contact points are still
being utilized.
DESCRIPTION
35