grabner HAPPY CAT Eignerhandbuch Seite 27

RIGGING
► Lay the mast lower section on top of the
boat and insert the stud under the mast-
foot into the receptive hole at the top of
the centerboard bracket assembly.
► Slot the mast sections together.
NEO
1. Mast lower section with mast foot
2. Mast middle section
3. Mast upper element with mast top
EVO
1. Mast lower section with mast foot
2. Mast section with short shrouds
3. Mast section
4. Mast upper element with mast top
► Push the neoprene-protection over the
shrouds and fit a short and a long shroud
each, port and starboard, to the eyebolts
of the trampoline frame side rails.
► Put the neoprene-protection over the
shackle.
All manuals and user guides at all-guides.com
► Insert the shaft of the masthead fly
through the two holes of the bracket fitted
to the masthead.
► Feed the main halyard end without cara-
biner from the rear of the masthead top
fitting, over the pulley arrangement.
► Feed the jib halyard over the pulley fitted
to the mast.
27