Startup / Operation - BOMANN VS 7316 Bedienungsanleitung, Garantie

NOTE: : : : NOTE NOTE NOTE
*Delivery scope!
•
Keep the parts to be replaced for another possible
door stop change.
• Remove the hinge cover and the blanking cap.
• Dismount the upper door hinge and lift out the
appliance door.
• Transfer the doorstop on the door underside. Set
the appliance door safely aside.
All manuals and user guides at all-guides.com
• Tilt the unit slightly backwards and lock it in this
• Move and fasten the lower door hinge to the op-
• Put the appliance back in the upright position. Put
• Move and fasten the upper door hinge to the op-
• Put on the hinge cover (*delivery scope) and the
• Check that the door is optimally aligned both ver-
• Dismount the door handle and attach it to the
Prior to first use Prior to first use
Prior to first use Prior to first use
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter "Cleaning and Maintenance".
19
position. Unscrew the feet and disassemble the
lower door hinge.
posite appliance side. Screw in the feet accord-
ingly.
on the appliance door and fix it in the intended
position.
posite appliance side after unscrewing the hinge
pin and inserting it from the other hinge side.
blanking cap.
tically and horizontally to ensure smooth opening
and closing of the door.
corresponding other door outer side. Refer to the
instructions in "Assembling the door handle".
Transfer the cover caps on the exposed holes to
the respective other door outer side.

Startup / Operation

Startup / Startup / Startup / Operation Operation Operation
CAUTION: CAUTION: CAUTION: CAUTION: