Cleaning The Condensate Receptacle; Cleaning And Refilling The Syphon; Water Pressure And Quality; Water Flow Rate - elco R3500 Betriebsanleitung

Maintenance

Cleaning the condensate receptacle

Cleaning and refilling the syphon

2
Cleaning and refilling the syphon

Remove the syphon (3) from the con-
densate connection;

Clean and fill it with fresh water;

Mount the syphon back in the original
position.
32
1

Combustion analysis

Check the combustion at full load and
minumum load, correct the settings if
necessary. An additional reference
check at 50% load is recommended.
Consult the chapter "commissioning:
combustion analysis" for more detailed
information.
3

Gas pressure

Check the dynamic pressure of the gas
supply to the boiler, when the boiler is
running at full load. In case of a boiler
cascade, all boilers should be running
at full load. See technical data for re-
quired values.
Cleaning the condensate receptacle

Remove the inspection hatch (2) to
access the inside of the condensate
receptacle;

Clean the receptacle;

Mount the inspection hatch.

Water pressure and quality

Check if the water pressure and quality
meet the requirements. Consult the
chapter "commissioning: water and
hydraulic system" for more detailed
information.

Water flow rate

Check if the water flow rate through the
boiler is within the limits. Consult the
chapter "commissioning: check water
flow" for more detailed information.
Combustion analysis
Check the combustion at full load and
minumum load, correct the settings if
necessary. An additional reference
check at 50% load is recommended.
Consult the chapter "commissioning:
combustion analysis" for more detailed
information.
Gas pressure
Check the dynamic pressure of the gas
supply to the boiler, when the boiler is
running at full load. In case of a boiler
cascade, all boilers should be running
at full load. See technical data for re-
quired values.