Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2
Commissioning
NOTE
Before screwing the rear cover, check that the
sealing is clean and undamaged . Gently tighten the
10 screws several times crosswise . Then tighten
the screws to the specified torque (see details on
housing rear panel) .
2.3 Installation of MLog Analyser software
NOTE
The requirement for installing the MLog
Analyser software is the Microsoft Windows 7
or a higher version of Microsoft Windows .
Proceed as follows when installing the Analyser
software:
(1)
Launch the setup file from the \setup subdirectory
of the USB stick supplied .
(2)
Select the language to be used to guide you
through the installation process .
(3)
Follow the instructions of the setup wizard .
(4)
If the installation has been successful, it is then
possible to establish the connection between the
MLog and the Analyser software .
(5)
To do this, launch the Analyser software via the
MLog program icon created .
20
BA3431002/04 DE-EN
Werbung
Inhaltsverzeichnis
