Safety Information; General Precautions; Definitions Of Signal Words And Warning Symbols - Mettler Toledo APR320 Benutzerhandbuch

1 Safety Information

Only use the device according to this manual. If you do not use the device according to these documents or if
the device is modified, the safety of the device may be impaired and Mettler-Toledo GmbH assumes no liability.

1.1 General Precautions

Intended Use
Use the device in accordance with this manual.
The device is intended for indoor use only.
Any other type of use is considered as not intended.
Misuse
Do not use the device other than for printing operations.
Do not use the device in hazardous environments.
Do not modify the device.
Do not use the device beyond the limits of the technical specifications.
Safety Notes
Ensure that the power socket outlet of the device is earthed and easily accessible, so that it can be de-
energized rapidly in emergencies.
Ensure that the supply voltage at the installation site lies within the range of 100-240 V.
Ensure that there is a space of at least 3 cm (1.25") at the rear in order to prevent the power cable from
being bent too strongly.
Check the power cable regularly for damage. If it is damaged, immediately disconnect the device from the
power supply.

1.2 Definitions of Signal Words and Warning Symbols

Safety notes contain important information on safety issues. Ignoring the safety notes may lead to personal
injury, damage to the instrument, malfunctions and false results. Safety notes are marked with the following
signal words and warning symbols:
Signal words
WARNING
CAUTION
NOTICE
Warning symbols
Electrical shock
General hazard: read the Operating Instructions for information about the hazards and the resulting
measures.
Notice
Ticket Printer
A hazardous situation with medium risk, possibly resulting in death or severe injury if
not avoided.
A hazardous situation with low risk, resulting in minor or moderate injury if not avoided.
A hazardous situation with low risk, resulting in damage to the instrument, other
material damage, malfunctions and erroneous results, or loss of data.
Safety Information​ ​ 3