Setup; Setup In Menu Mode; Entering Or Exiting Menu Mode; Language Setting - Mettler Toledo APR320 Benutzerhandbuch

4 Setup

4.1 Setup in Menu Mode

The Menu Mode is used to configure the printer in order to meet specific printing application requirements.

4.1.1 Entering or Exiting Menu Mode

To enter Menu Mode:
1 When in Home Screen (see [LCD Display Page 6]), press and hold
The printers enters the Menu Mode, with Comm
Setting selected.
2 Navigate within the menus using the functions keys as
described in [Function Keys Page 5]
To exit Menu Mode:
1 When in the Menu Mode, press
2 You may have to press
until the printer shows the Home Screen.

4.1.2 Menu Mode Structure

Note: For changes to any menu item, you must exit Menu Mode before the changes can take effect. Unless
otherwise stated.
Level 1
Comm Setting
(Communication
Setting)
Ticket Printer
to leave current menu.
for multiple times or press and hold
Level 2 Level 3
Auto Connection Off
On*
Baud Rate
9600*
19200
38400
57600
115200
1200
2400
4800
Stop Bit
1*
2
Bits/Parity 8 / NONE*
8 / ODD
8 / EVEN
Flow Ctrl (Flow No*
Control)
Xon / Xoff
RTS / CTS
for 3 seconds.
Menu
Comm Setting

Language Setting

for 3 seconds to exit the Menu Mode
Comment
For RS232 communication. When set as On, the
printer uses the baud rate, parity, and stop bit
detected from the weighing terminal.
Valid when Auto Connection is set as Off.
Valid when Auto Connection is set as Off.
Valid when Auto Connection is set as Off. Note:
Make sure that the Bits/Parity of the connected
weighing terminal is set to 8.
Valid when Auto Connection is set as Off.
Setup​ ​ 13