Alarm; Setting The Alarm Time - TechniSat DIGITRADIO UP 55 Bedienungsanleitung

13 Alarm

The DIGITRADIO UP 55 has 2 alarms.
> Open the main menu. Use the << or >> touch fields to select the [Alarm] menu
item and tap on OK/NAV.
> Then use << and >> to select the [Set Alarm 1] or [Set Alarm 2] function. Press
OK/NAV to begin configuring Alarm 1 or Alarm 2.

13.1 Setting the alarm time

The wake-up function cannot be operated until the correct time has been set.
Depending on the configuration, this occurs automatically or will need to be set
manually. See Section 15.2 for further information.
> Use the << or >> buttons to select one of the Alarm 1 or Alarm 2 alarm time
memories, then tap on OK/NAV.
> Go through all the points one after the other. Confirm each input with OK/NAV.
You will then be automatically taken to the next setting. You can change the
relevant values or options using << or >>.
Alarm > Off/On
100
to activate or switch off the alarm.