Herunterladen Inhalt Inhalt Diese Seite drucken

Einbau / Installation / Installation - Kessel UNIVA-Aqualift Einbau- Und Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Lifting unit shown from above without grate and locking cover plate.
Hebeanlage von oben, ohne Gitterrost und Abdeckplatte dargestellt.
Poste de relevage vu de haut présenté sans grille et sans couvercle.
All manuals and user guides at all-guides.com
Einbau · Installation · Installation
Einhängeflansch der Pumpe
Suspension flange of the pump
und des Gehäuses
and housing
Bride de suspension de la pompe
du boîtier
5
Stufenlose Einbautiefe durch
beliebiges Absägen der UNIVA-
Perfect equalizing by sawing the UNIVA-
Aufsatzstücke (Best.-Nr. 32500)
frames off (ref. 32500)
Mise à niveau parfaite par découpage des
rehausses UNIVA (réf. 32500)
Um Schmutzablagerungen zu vermeiden,
sollte beim Einbau des Reduzierstückes darauf geachtet werden,
To avoid deposits of dirt, pay attention, by setting the reducer,
daß die gerade Fläche unten liegt.
that it is situated on the flat part.
Afin dʼéviter les dépôts de saletés, il faut faire attention,
en montant la pièce de réduction, que celle-ci repose sur al partie plate.
5 Meter mit Schukostecker für Anschluß
Wire of 5 m with plug. Power 230 V ~ 50 Hz.
an Steckdose 230 V ~ 50 Hz. Absicherung mind. 6 Amp. träge
Protection of min. 6 Amp. inert
Câble de 5 m avec prise de courant pour branchement
au secteur 230 V ~ 50 Hz.
Protection au moins de 6 Amp. inerte

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis