Proweatherlive (Pwl) Live Data & Operation; View Live Data; Maintenance; Firmware Update - Bresser 4CAST PRO SF Bedienungsanleitung

NOTE:
Calibration of most parameter is not required, with the exception of Relative Pressure, which
must be calibrated to sea-level to account for altitude effects.
7. PROWEATHERLIVE (PWL) LIVE DATA & OPERATION
7.1

VIEW LIVE DATA

Login your ProWeatherLive account. Once your device is connected, your device's live weather
data will show on the dashboard page.
NOTE:
Please press "Help" in the
8.

MAINTENANCE

8.1

FIRMWARE UPDATE

The console supports OTA firmware update capability. Its firmware may be updated over the air
anytime (whenever necessary) through any web-browser on a PC/Mac with WI-FI connectivity.
Update function, however, is not available through mobile/smart devices.
Current firmware
version

8.1.1 FIRMWARE UPDATE STEP

1. Download the latest version firmware to your PC/Mac.
2. Set the console into AP (access point) mode then connect the PC/Mac to the console (refer
to section 6.1 and 6.2).
3. From the SETUP page, press ADVANCED to enter advance setting
4. Under the firmware upload section, press
your PC/Mac.
5. Press
Upload
The update time is around 5 ~ 10 minutes. While updating, the
progress will be displayed (i.e. 100 is completion).
6. The console will restart once the update is completed.
should you have any query on the PWL operation.
Firmware version: 1.00
Firmware update in ADVANCED page
to start firmware update.
Browse
Upload
to locate the firmware file saved on
Browse
73
Select the firmware file for update
Press to start upload the firmware
to console