Fixing To The Wall - TESY HL-246VB W Bedienungs Und Aufbewahrungsanleitung

FIXING TO THE WALL

EN
Warning! To prevent damage or the risk of fire:
• Ensure a sufficient distance from the wall (min. 25 cm
at the sides), ceiling (min. 20 cm), floor (min. 1.5 m),
fixtures (min. 1 m) or other appliances (min. 1 m).
• Only use the fastening bracket provided for fixing
the appliance to the wall, to ensure the necessary
distance from the rear wall.
1. Selecting a place to install the appliance
• on a wall that is sufficiently strong
• which is somewhat sheltered, so that the appliance
is not shaken excessively by strong winds;
• at least 1 m from people, animals and plants;
• which complies with the distances shown in the
sketch below
Note: The appliance is manufactured entirely of
rust-proof materials and can be exposed to normal
environmental impacts
2. Mark the drill holes according to the diagram:
Drill 2 holes with diameter 6 mm in the wall, The drilling
depth is approx. 40 mm
4
Usage and Storage Instructions
3. Insert a wall plug into each hole.
4. Screw two long screws into each hole. Allow the
5. Hang the appliance on the screws.
Mark the drill hole for screwing the fastening bracket
6. Take the appliance off the wall and drill the
•
•
Supplied round sticker
7. Hang the appliance again on the screws.
8. the fastening bracket securely to the wall using a
head of the screw 5mm so that the appliance can be
hung on these.
corresponding hole.
Using a 6 mm bit, drill a hole to fit the wall plug.
Insert a wall plug.
screw.