Troubleshooting; Technical Data - ECG VT 5220 2in1 Flex Clean Bedienungsanleitung

TROUBLESHOOTING

Problem
The handheld vacuum
cleaner does not work
The motorized brush of the
floor vacuum cleaner does
not work.
The handheld vacuum
cleaner does not collect dirt
or has weak suction power.
Dust escapes from the
handheld vacuum cleaner.
The battery does not hold
the charge.

TECHNICAL DATA

VT 5220 2in1 Flex Clean
Wireless vacuum cleaner
Motor power: 150 W
Washable filter
Charging time: appr. 4.5 hours
Operation time: 30 minutes
Dust container capacity: 0.5 l
Charging battery indicator
HEPA filter class H12
Accessories: motorised brush with replaceable roller for carpets and hard surfaces, mini brush, dusting
spatula for cleaning hard surfaces, adapter, wall mount
Charging adapter:
AC 100–240 V, 50/60 Hz, 0,5 A
DC 26.5 V – 500 mA
Batteries:
Li-ion battery 22,2 V (6× 3,7 V); 2200 mAh
VT 6220 2in1 Power Flex
Wireless vacuum cleaner
Motor power: 200 W
Washable filter
Charging time: appr. 4 hours
Operation time: 35 minutes
Dust container capacity: 0.5 l
Charging battery indicator
HEPA filter class H12
10
Cause
• The battery is empty.
• Faulty battery (does not hold the charge).
• Dirty contacts between the appliance and
the charging contacts.
• Charging adapter is connected to an outlet
without voltage.
• The charger is connected.
• The blade fan wheel is clogged with dirt.
• Broken belt.
• The handheld vacuum cleaner is not properly
inserted.
• Dust container is full.
• You must clean or replace the dust container
filter.
• The vacuum cleaner battery is empty.
• Dust container is full.
• Incorrectly installed dust filter.
• Torn dust filter.
The battery is dead.
Correction
• Charge the appliance.
• The battery is dead.
• Clean the contacts.
• Check the fuses, use different outlet.
• Disconnect the charger.
• Remove dirt from the blade wheel.
Cu tangled hair, etc. carefully with
scissors.
• Call service.
• Insert the handheld vacuum properly.
• Empty the dust container.
• Remove the filter and make sure the
suction hole is not clogged. Clean or
replace filter.
• Charge the vacuum cleaner.
• Empty the dust container.
• Check proper insertion of the dust
filter.
• Replace the dust filter.
Call service.