Troubleshooting; Technical Data - ECG VP S 1010 Bedienungsanleitung

4. Cleaning of the appliance surface: To clean use a soft cloth slightly moistened with a few drops of mild
detergent. Never use a solvent or any abrasive scouring cleaners. Never immerse vacuum cleaner in water
or any other liquid and do not clean it under running water.
Warning:
Replacement filter bags for the VP S 1010 vacuum cleaner can be found under the name KOMA EC 22S, SWIRL
Y 45.

TROUBLESHOOTING

Before contacting the service, check the following list of common problems and possible remedies.
Problem
The motor will not
start.
The suction power is
reduced.

TECHNICAL DATA

Suction power 180 W
Two ‑piece plastic tube
Rubber coated wheels for easy transport
Automatic rewind
Full dustbag indicator
Volume of the dust bag – 1.5 l
Operating radius 7.5 m
Filters: motor filter, HEPA filter F7, paper bag 1,5 l
Accessories:
• Two ‑piece plastic tube
• Floor brush
• Tapered multipurpose brush
Weight: 3.1 kg
Nominal voltage: 220–240 V~ 50/60 Hz
Nominal input power: 800 W
Noise level: < 80 dB
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic
recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specified location for recycling electric and electronic equipment. Prevent negative
impacts on human health and the environment by properly recycling your product. Recycling contributes to
preserving natural resources. For more information on the recycling of this product, refer to your local authority,
domestic waste processing organization or store, where you purchased the product.
This product complies with EU directives on electromagnetic compatibility and electrical safety.
The operating manual is available on internet at www.ecg ‑electro.eu.
Changes of text and technical parameters reserved.
6
Possible cause
The vacuum cleaner is not
powered.
Full dust bag, clogged hose or
tube or dirty filters.
Solution
Check the power cord and the electrical outlet.
If the device still does not work, contact an
authorized service centre.
Replace the dust bag, remove foreign objects from
the hose or tube, replace the filters.
08/05