Assembling - Fuxtec E146C Original Bedienungsanleitung

Original User Manual FUXTEC 40V Battery Lawn Mower E146C

Assembling

WARNING!
Before performing any work on the garden tool, remove the safety key.
Attaching the handle bar
Fold the lower handle upwards.
Insert the two screws into the two holes and fasten the bar with the screws.
Place the upper handle on the lower handle .
Attach the upper handle .
Insert the threaded bolt through the holes in the upper handle and the lower handle .Fasten
the screw with the triangle knob.
Attaching the grass catcher
1.Lift the back cover of the mower .
2.Hook the grass catcher bag into the lawn-mower .
3.Fold the back cover down again .
Attaching the side discharge and plug (optional )
1.Lift the discharge flap.
2.Hook the side discharge into the lawn-mower .
3.Fold the flap down again
4.Lift the back cover of the mower .
5.Hook the plug into the lawn-mower .
6.Fold the back cover down again .
30