Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The Meter
FUNCTION
COST
POWER
COST
Control light
Putting into operation
1.
Plug the lnspector II into a household wall outlet and the meter operating time will be displayed.
2.
Plug a device or appliance into the lnspector II. You can also use a multiple plug with the lnspector II in order to
meter the electrical consumption of more than one device or appliance.
3.
Use the FUNCTION button to switch between functions:
Data
Unit of measurement
Metered duration
Hour and minute [hh:mm]
Energy consumption
Watt [W]
Voltage
Volt [V]
Current
Ampere [A]
Frequency
Hertz [Hz]
Highest power consumption
Watt [W]
Lowest power consumption
Watt [W]
Electricity rate (variable)
Euro/kilowatt-hour [€/kWh]
Total operating costs
Euro [€]
Please note: Total operating costs [€] will be displayed together with the total recorded energy consumption [kWh].
Display with one press of a button
Pressing the POWER button will display the current power consumption.
Pressing the COST button will display the total operating costs [€] together with the total recorded energy
consumption [kWh].
Control lamp: Warning light, shines only in case of overvoltage. Not lit during the „normal" operation.
Adjusting electricity rates
1.
Press the COST button and keep it depressed. The device will display the adjusted price per kilowatt hour.
Electricity rates vary according to where you live. Contact your local energy supplier for information on
prices and adjust your device accordingly.
2.
To adjust the electricity price on your device, press the COST button and while keeping it depressed, press
the FUNCTION button at the same time. The current entered electricity price will begin to blink.
3.
With the POWER and COST buttons you can now adjust the electricity price on your device accordingly.
4.
When all adjustments have been made, press the FUNCTION button to confirm.
Werbung
