VDO EDM eco Release II Bedienungsanleitung Seite 113

Unit settings
Changing fuel consumption calibration values
If the fuel consumption gauge on the consumption display unit
• indicates that fuel consumption was less than it actually was, you must reduce the fuel
consumption calibration value.
• indicates that fuel consumption was more than it actually was, you must increase the fuel
consumption calibration value.
If several vehicles of the same type are fitted with the same type of engine, a calculated calibration
value can be used for all these vehicles.
42
All manuals and user guides at all-guides.com
1 Press the key and the
settings.
86(U 6HW83
The first menu item
6\6W( 6HW83
2 Select the
>
(- 31).
If PIN protection has already been activated, you will automatically be asked
to enter the system PIN number in the place indicated (-> 24).
3 Instead of the value currently set, e. g.
required for the vehicle.
Values are entered in the same way as PIN numbers (-> 24).
4 Confirm the entry using the
© Siemens VDO Trading GmbH
key at the same time to switch to the unit
will be displayed automatically.
&$/ 6\6W( &RQ6W )8(/
> > >
FUEL CAL
 &2Q6W
, enter the new calibration value
key.
EDM eco
Operating instructions
>
(- 27) menu item
TU00-1404-0311020