Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Description
1
Beam with measuring system
2
Right measuring arm holder, adjustable, with digital display and operating elements
2.1 Housing
2.2 LCD-display
2.3 Key for ON/OFF and HOLD
2.4 Selector key for measuring unit, reference, MAX/MIN and tolerance
2.5 Cover for battery compartment and data exit
2.6 Opening for RESET
2.7 Locking screw for clamping the measuring arm holder
3
Left measuring arm holder, adjustable
3.1 Locking screw for clamping the measuring arm holder in any position; allowing
perfect balancing of the measuring instrument for every measuring task.Particularly
advantageous when measuring small distances.
4
Fine adjusting device for adjusting to the required dimension (depending on type of
instrument)
4.1 Locking screw
5
Mounting grooves on upper and lower longitudinal edge of both measuring arm holders, each
with two threaded bores. In order to extend the application range , the exchangeable Measuring
Arms 844 Te/Tx or Mounting Attachments 844 Tm can be reversed
Accessories
Measuring Arms 844 Te
Required with the following measuring anvils: 844 Tp, 844 Ts, 844 Tk, 844 Tr, 844 Tg.
Measuring Arms 844 Tx
Required with the following measuring anvils: 901 to 908, 911 H, 912, 913.
Mounting Attachments 844 Tm
Required with the following measuring anvils: 844 Ti, 844 Ta, 844 Tv, 844 Tz, 844 Tt, 844 Tu, 844 Tb,
844 Tc, 25 Eb, 25 Es, 25 Eh.
Introduction
The Digital Universal Caliper 25 ES is used for measuring of outside and inside measurements,
external and internal threads, hole centre distances, registers, narrow collars, grooves, dovetails,
outside and inside tapers, external and internal tapers. Patented mounting of measuring arms resp.
mounting attachments is provided on the upper or lower longitudinal edge of both measuring arm
holders. The application range for internal and external measurements can be extended by 75 mm by
reversing the measuring arms. Virtually all measuring tasks can be solved on account of the various
operating functions of the instrument and of the wide range of accessories.
All manuals and user guides at all-guides.com
GB
USA
Before the Digital Universal Caliper 25 ES is put into operation please read these instructions
carefully.
Safety points concerning the battery:
• not rechargeable
• do not incinerate
• dispose off as prescribed.
This instrument conforms to the EU-recommendations 89/336/EWG concerning
electromagnetic compatibility.
Important notes concerning first time use
The Digital Universal Caliper requires no extensive care. In order to ensure stable accuracy and
function the following should be observed:
• protect the Universal Caliper from dust, water or oil
• keep the beam clean and dry by periodically wiping over it with a dry, clean cloth
• when the data exit is not in use keep it closed, using the respective cover
• do not subject the caliper to any electric current (i.e. electric marker pen)
• unauthorized opening of the instrument forfeits the warranty.
Should you have any questions regarding the instrument, contact us and we shall be pleased to
answer them.
Technical Data
Measuring range
outside
inside
Extended application range (reversing the measuring arms by 180°)
outside
inside
Beam cross section
Resolution, switchable
Accuracy
Max. measuring speed
Measuring system
Digital display
Battery
Data exit
Operating temperature
Storage temperature
Max. relative humidity
Weight (without measuring arms).750 g
* caliper without fine adjustment
9
10
0-300 mm (12")*
0-300 mm (12")
0-600 mm (24"
25 -325 mm
25-325 mm
25-625 mm
up to 375 mm
up to 375 mm
up to 675 mm
up to 400 mm
up to 400 mm
up to 700 mm
LCD, 6 digits and negative sign (-),
Lithium 3V, type CR2032, 190 mAh
RS 232 C-compatible via interface
770 g
970 g
0-1000 mm (40")
25-1025 mm
up to 1075 mm
up to 1100 mm
24.5 x 5.6 mm
0,01 mm (.0005")
DIN 862
1,5 m/s (60"/s)
capacitive
height of characters 6 mm
service life approx. 2 years
cable with opto-coupler
+5 °C to +40 °C
– 20 °C to +70 °C
80%
1330 g
Werbung
Inhaltsverzeichnis
