Spare Parts And Accessories; Disposal; Ec Declaration Of Conformity - Stihl RM 448 TC Gebrauchsanleitung

English
– Vibration value a
hv
with EN 12096, EN 20643, EN ISO 5395-2,
handlebar: 4.40 m/s²
For information on compliance with Employers'
Vibration Directive 2002/44/EC and
S.I. 2005/1093, see www.stihl.com/vib.
19.4 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
20 Spare Parts and Accesso‐
ries
20.1

Spare parts and accessories

These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
20.2 Essential Spare Parts
– Blade: 6358 702 0100
– Blade fastening screw: 9008 319 9028
– Washer: 0000 702 6600

21 Disposal

21.1 Disposing of the Lawn Mower
Information on disposal is available from your
local authority or from a STIHL dealer.
Improper disposal may be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose of the product with domestic
waste.
36
measured in accordance
20 Spare Parts and Accessories
22 EC Declaration of Con‐
formity
22.1 STIHL RM 448.1 TC,
RM 448.1 PC Lawn Mower
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
– design: lawn mower
– manufacturer's brand: STIHL
– type: RM 448.1 TC, RM 448.1 PC
– cutting width: 46 cm
– serial number: 6358
complies with the relevant provisions of Direc‐
tives 2000/14/EC, 2006/42/EC, 2014/30/EU and
2011/65/EU and has been developed and manu‐
factured in accordance with the versions of the
following standards valid on the date of manufac‐
ture: EN ISO 5395-1, EN ISO 5395-2 and
EN ISO 14982.
Notified body involved:
TÜV Rheinland LGA Products GmbH
Tillystrasse 2
90431 Nuremberg, Germany
The measured and guaranteed sound power lev‐
els were determined in accordance with Directive
2000/14/EC, Appendix VIII.
Measured sound power level:
– RM 448.1 TC: 94.4 dB(A)
– RM 448.1 PC: 95.3 dB(A)
Guaranteed sound power level:
– RM 448.1 TC: 95 dB(A)
– RM 448.1 PC: 96 dB(A)
The technical documents are stored at
STIHL Tirol GmbH.
The year of manufacture and machine number
are indicated on the lawn mower.
Langkampfen, 29.06.2021
STIHL Tirol GmbH
p.p.
Matthias Fleischer, Head of Research and
Development Division
0478-111-9952-B