Technical Data; Safety Instructions; Symbols And Icons - Parkside PSTD 800 C3 Originalbetriebsanleitung

GB IE

Technical data

Jigsaw ....................... PSTD 800 C3
Nominal input voltage ...... 230 V~; 50 Hz
Rated input P. ............................. 800 W
Protection class .....II (double insulation)
Idling stroke rate n
Saw stroke .................................. 22 mm
Cutting depth in wood .......... max. 80 mm
Cutting depth in metal ............ max. 8 mm
Weight (with battery) .......... max. 2.17 kg
Bevel cuts ............. each 0°/15°/30°/45°
Sound pressure level
(L ) ................... 89.3 dB(A), K
pA
Sound power level
(L ) ............... 100.3 dB(A), K
WA
Vibration (a )
h
in wood ........ 9.037 m/s
in metal ........ 9.141 m/s
Levels of noise and vibration were deter-
mined according to the standards and reg-
ulations in the declaration of conformity.
The vibration emission value has been
measured according to a standardised test-
ing method and may be used for compari-
son with another power tool.
The indicated vibration emission value may
also be used for an introductory assess-
ment of the exposure.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
22
.............0 - 3100 rpm
0
= 3 dB
pA
= 3 dB
WA
; K= 1.5 m/s
2
2 ; K= 1.5 m/s
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).

Safety instructions

Ensure that the safety instructions are ob-
served when operating the trimmer.

Symbols and icons

Symbols on the trimmer:
Carefully read these operating in-
structions.
2
2
into the beam! Laser class 2
P max.: < 1 mW ; λ = 650 nm
EN 60825-1: 2014
Protection class II
(double insulation)
Electrical appliances must not be
disposed of with the domestic
waste.
Symbols in the manual:
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with information
on preventing damage.
Caution! –
Laser beam
Do not look