Technical Data - Parkside PSTDA 20-Li B3 Originalbetriebsanleitung

GB IE
16 Saw blade for metal
17 Saw blade for wood
18 Allen key
19 Parallel guide
20 Slide shoe
21 Tension tear protection
22 Rechargeable battery
23 Release button for rechargeable
battery
24 Charger
25 Storage case
26 Adapter for external dust extrac-
tion
27 Clamping lever

Technical data

Cordless pendulum
sabre saw ...............PSTDA 20-Li B3
Nominal input voltage ................. 20 V
Idle speed n ......................0 - 2700 rpm
0
Saw stroke .................................. 20 mm
Cutting depth in wood .......... max. 80 mm
Cutting depth in aluminium .... max. 12 mm
Cutting depth in metal .................... 5 mm
Weight (with battery) ............ max. 2.1 kg
Sound pressure level
(L ) ................... 85,2 dB(A), K
pA
Sound power level
(L ) ................. 96,2 dB(A), K
WA
Vibration (a )
h
in wood .......... 9,27 m/s
in metal ........ 12,67 m/s
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can only be operated with the
following rechargeable batteries:
PAP 20 A1, PAP 20 A2, PAP 20 A3.
26
= 5 dB
pA
= 5 dB
WA
2 ; K= 1,5 m/s 2
; K= 1,5 m/s
2 2
This type of battery may be charged
with the following chargers: PLG 20 A1,
PLG 20 A3, PDSLG 20 A1.
Battery (Li-Ion) ...............PAP 20 A1
Battery cells ......................................... 5
Nominal voltage ......................... 20 V
Capacity ..................................... 2.0 Ah
Energy .....................................40 Wh
Charging time ...................... approx. 1 h
Temperature.......................... max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
Charger ..............................PLG 20 A1
Nominal consumption .....................65 W
Voltage input ............ 230-240 V~, 50 Hz
Voltage output ......................... 21,5 V
Voltage current ..............................2,4 A
Safety class .....................................
Miniature fuse ............................. T3.15A
Attention! This charger can only
recharge the following batteries:
PAP 20 A1, PAP 20 A2, PAP 20 A3.
Levels of noise and vibration were deter-
mined according to the standards and reg-
ulations in the declaration of conformity.
The vibration emission value has been
measured according to a standardised test-
ing method and may be used for compari-
son with another power tool.
The indicated vibration emission value may
also be used for an introductory assess-
ment of the exposure.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
II