Beurer BM 81 easyLock Gebrauchsanweisung Seite 30

Step 4: BM 81
(Data transfer immediately following the measu-
rement): If the Bluetooth
ted, the data transfer to the „beurer HealthManager
Pro" or the „beurer HealthManager" app starts
automatically after the measurement.
Also note the following information:
• When connecting for the first time, a randomly generated six-digit PIN code is displayed on the device, and
at the same time an input field appears on the smartphone in which you must enter this six-digit PIN code.
After successfully entering the code, the device will be connected to your smartphone.
• Ensure that the „beurer HealthManager Pro" or „beurer HealthManager" app on your smartphone is always
activated and open when you start the data transfer on the device.
• You can tell that the data transfer is in progress by the Bluetooth
• If your smartphone has a protective cover, remove it to ensure that there is no interference during the trans-
fer.
Evaluating the results
General information about blood pressure
• Blood pressure is the force with which the bloodstream presses against the arterial walls. Arterial blood
pressure constantly changes in the course of a cardiac cycle.
• Blood pressure is always stated in the form of two values:
– The highest pressure in the cycle is called systolic blood pressure. This arises when the heart muscle
contracts and blood is pumped into the blood vessels.
– The lowest is diastolic blood pressure, which is when the heart muscle has completely stretched back
out and the heart fills with blood.
• Fluctuations in blood pressure are normal. Even during repeat measurements, considerable differences be-
tween the measured values may occur. One-off or irregular measurements therefore do not provide reliable
information about the actual blood pressure. Reliable assessment is only possible when you perform the
measurement regularly under comparable conditions.
Cardiac arrhythmia
This device can identify any cardiac rhythm disturbances as part of the analysis of your recorded pulse signal
during blood pressure measurement. In this case, after the measurement, the device will indicate any irreg-
ularities in your pulse by displaying the
Arrhythmia is an illness in which the heart rhythm is abnormal because of flaws in the bioelectrical system that
regulates the heartbeat. The symptoms (skipped or premature heart beats, pulse being slow or too fast) can be
caused by factors such as heart disease, age, physical disposition, excess alcohol and tobacco, stress or lack
of sleep. If the symbol appears on the display after the measurement, the measurement must be repeated
as the measurement accuracy may be impaired. To assess your blood pressure, only use the results that have
been recorded without corresponding irregularities in your pulse. If the
consult your doctor. Only they can establish the existence of an arrhythmia during a checkup, using their
means of diagnosis.
function has been activa-
®
symbol in the display. This can be an indicator for arrhythmia.
Step 4: BM 81
(Data transfer at a later point in time): Go into
the memory recall mode for the desired user me-
mory (see "Saving, accessing and deleting measu-
red values"). The data transfer starts automatically.
symbol shown on the display.
®
symbol appears frequently, please
30