Electric Safety Directions - SHX SHXA700-WIFI Installations & Bedienungsanleitung

• Do NOT operate the heater in small rooms when occupied by people not capable of leaving the room by
themselves. The surface of the heater can reach a surface temperature of up to 95°C, keep out of reach
of children and disabled persons.
• Keep away babies and children from all packaging material such as plastic bags to avoid danger of
suffocation.

1.3 Electric safety directions

• When installing, repairing or servicing the heater it must be turned off and disconnected from power. Before
installation please check if the heater is free of damages.
• If the heater or the power cord is damaged in any form do NOT use the heater and contact your SHX dealer
for repair or replacement. Repairs, maintenance or any changes must be carried out by an authorized SHX
dealer.
• DO NOT attempt to repair the heater by yourself, this will void your warranty.
• If the heater has been dropped do NOT operate it and contact your SHX dealer to make sure it is free of any
damages.
• This heater is designed to operate at 230V, 50Hz AC. If your supply mains do not comply with this, do NOT
use the heater.
• the heater must not be located immediately below a socket-outlet
• WARNING: The glass heater must not be used if the glass surface is damaged.
• WARNING: Do not use this heater in small rooms when they are occupied by persons not capable of leaving
the room on their own, unless constant supervision is provided.
2. How to care for your SHX heater
2.1 Cleaning
Always unplug your heater and let it cool down completely before cleaning. Never dip into water and never
splash water on it. Clean the heater with a soft damp cloth. For glass models use a soft cloth and glass cleaner.
Never use a wet cloth and make sure to dry the heater when clean with a dry cloth. Do not use any abrasive
materials, solvents or harsh cleaning sponges as this could cause scratches or other irreparable damage. Before
operating the heater again it must be completely dry.
2.2 Using/Working
Please note that the heater may discolour with use. This is due to airborne pollution and is not a fault. Do not
cover your heater with a picture foil and do not paint or print the heater yourself. This might cause damage to
the heating element and will void your warranty.
If you notice any noise, smells, visible changes or exceptionally high temperatures please discontinue use and
contact an authorised SHX dealer
.