Linksys WRT54GS Anleitung Seite 11

Wireless-G Broadband Router with SpeedBooster
Connect on Demand: Max Idle Time. You can configure the Router to cut the Internet connection after it has been inactive
for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on
Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet
again. If you wish to activate Connect on Demand, click the radio button. In the Max Idle Time field, enter the number of
minutes you want to have elapsed before your Internet connection terminates.
Keep Alive Option: Redial Period. If you select this option, the Router will periodically check your Internet connection. If
you are disconnected, then the Router will automatically re-establish your connection. To use this option, click the radio
button next to Keep Alive. In the Redial Period field, you specify how often you want the Router to check the Internet
connection. The default Redial Period is 30 seconds.
• L2TP. L2TP is a service that applies to connections in Israel only.
User Name and Password. Enter the User Name and Password provided by your ISP.
L2TP Server. This is the IP address that the Router has, when seen from the Internet. Your ISP will provide you with the IP
Address you need to specify here.
Connect on Demand: Max Idle Time. You can configure the Router to cut the Internet connection after it has been inactive
for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on
Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet
again. If you wish to activate Connect on Demand, click the radio button. In the Max Idle Time field, enter the number of
minutes you want to have elapsed before your Internet connection terminates.
Keep Alive Option: Redial Period. If you select this option, the Router will periodically check your Internet connection. If
you are disconnected, then the Router will automatically re-establish your connection. To use this option, click the radio
button next to Keep Alive. In the Redial Period field, you specify how often you want the Router to check the Internet
connection. The default Redial Period is 30 seconds.
Chapter 3: Configuring the Wireless-G Broadband Router
The Setup Tab - Basic Setup
Figure 3-8: L2TP Connection Type
10