Introduction And Safety; Intended Use; General Safety Instructions For Power Tools; Workplace Safety - Fuxtec E1LB20 Original Bedienungsanleitung

Original User Manual FUXTEC 20V Leaf Blower FX-E1LB20

Introduction and safety

Never allow children or persons unfamiliar with these instructions to use the garden device. Children
should be supervised to ensure that they do not play with the device.

Intended use

This garden device is designed as a blowing device for blowing leaves, grass, paper and similar things
in the private sector.
The device is to be used in accordance with the descriptions and safety instructions given in this
manual and in the descriptions and safety instructions provided. Any other use is not intended. Any
use other than that intended will invalidate the warranty and result in the manufacturer's refusal to
accept any responsibility. The user is liable for all damage to third parties and their property. Operate
the device only in the technical condition specified and delivered by the manufacturer. Unauthorized
modifications to the device exclude the manufacturer's liability for any resulting damage.

General safety instructions for power tools

WARNING!
Read all safety information and instructions. Failure to follow the safety information and instructions
may result in electric shock, fire and/or serious injury.
Keep all safety information and instructions for future reference.
The term power tool used in the safety information refers to power tools that operate on mains
power (with power cord) and battery-powered power tools (without power cord).

Workplace safety

- Keep your work area clean and well lit. Clutter or unlit work areas can lead to accidents.
- Do not work with the power tool in a potentially explosive environment containing flammable
liquids, gases or dust. Power tools generate sparks that can ignite the dust or vapours.
- Keep children and other persons away from the power tool throughout its use. If distracted, you
may lose control of the device.

Electrical safety

- Keep power tools away from rain or wet conditions. Water entering a power tool increases the risk
of electric shock.
3