Graphs - OWA DELFIN MEGA Einbau- Und Betriebsanleitung

10.3 Graphs

Pressure loss in operating position (mark-
ing "1") with a raw water hardness of
20 °dH and a mixing water hardness of
about 8 °dH dependent on the volume
flow. The overflow valve opens from a
pressure loss of about 1 bar. The result is
that the mixing water hardness increases.
Fig. 8 : Pressure loss
The maximum possible daily drawn vol-
ume dependent on the raw water hardness
with a mixing water hardness of 8 °dH. A
(possible) increase in hardness of the mix-
ing water under unfavourable operating
conditions can be balanced out by increas-
ing the raw water hardness setting (17).
Fig. 9 : Max. daily drawn volume
44
Data sheet
Salt consumption relative to 1 m³ of mixing
water of 8 °dH dependent on the raw water
hardness.
Fig. 10 : Salt consumption
Flushing water volume relative to 1 m³ mix-
ing water of 8 °dH dependent on the raw
water hardness.
Fig. 11 : Flushing water volume
DELFIN MEGA