Operating; Oscillation; Timer; Mist Function - TREVIDEA G3FERRARI KLIMAS Bedienungsanleitung

or if you are using different batteries, the possible leakage of the battery fluid may damage the remote
control.
- Whatever the type of exhausted battery, it must not be thrown in the household waste, in the fire or in the
water. Each type of exhausted battery must be recycled or disposed of in the appropriate dedicated
collection centers.

OPERATING

Once finished assembling the unit, place the fan following the safety instructions, then plug it to the electrical
outlet. Pressing ON/OFF (F on panel) or ON/SPEED (remote control) The rotation power can be adjusted on
3 different levels by pressing button B (on panel) or ON/SPEED (remote control).
Press the OFF button to stand-by the appliance.

OSCILLATION

The oscillation of the head is only possible when the fan is turned on and it can be activated by pressing L
button (on panel) or OSC (remote control). Press the button again to stop this function.

TIMER

Press E button (on panel) or TIMER (remote control) if you want the appliance to turn off after a certain
period of time (between 1 and 12 hours). Press once to set it off after 1 hour. Every time you press the button
the time increases 1 hour, up to 12 hours. LED display shows the time set.

MIST FUNCTION

The mist function can be activated independently or combined with the fan for spreading the mist throughout
the environment. Press I button (on panel) or MIST (remote control) to activate the function.

BREEZE AND SLEEP MODE

NORMAL
MODE
BREEZE
SLEEP
At switch on the fan will go automatically on NORMAL mode.
- By pressing the MODE button on the remote control you can activate the BREEZE mode (the
corresponding indicator lights up on the display). This mode reproduces the natural breath of the
wind, according to some preset cycles that regulate the power automatically from a light breeze
to a most powerful jet.
- Press the MODE button again to activate the SLEEP mode (the indicator lights up on the
display). This feature is ideal at night: the ventilation cycles are preset and change every 30
minutes, alternating light soft wind, powerful breeze and some pauses for a greater comfort
during sleep.
Below is illustrated the functioning of fan, based on the choice of mode and speed

CLEANING

Disconnect the plug from the electrical outlet before attempting any cleaning operation.
Do not immerse the unit in water. In any case prevent splashes of water or other liquids reaching the motor
ALTA
HI speed constant
A. Alterning of HI, MID,
and LOW
30 min in (A) then
min in (B) then (C)
SPEED
MEDIA
MID speed constant
B. Alterning of MID
and LOW
30 30 min in (B)
then (C)
BASSA
LOW speed
constant
C. Alterning of
LOW and OFF
Alterning of LOW
and OFF
12