Setting The Temperature - Bosch Sensixx B25L professional Gebrauchsanleitung

en
10. «Water empty» pilot light
11. Housing with internal steam generator
12. Mains plug
13. Mains cable with storage facility
14. Cord clip
15. Temperature dial
16. Iron pilot light
17. Steam release button
18. Soleplate
19. Steam gun
20. Steam release button
21. Steam concentrator
22. Brush extension
23. Diffuser extension
24. Fabric cleanser extension
25. Comb brush extension
26. Funnel
27. Cloth protection sole cover
29. Connection plug
29. Accesories box
30. Slot position for connection
31. Protection cap
Preparations (A)
1. Remove any label or protective covering from the
soleplate.
2. Place the appliance horizontally on a solid, stable
surface. You may remove the iron pad from the
appliance and place the iron on it on another
solid, stable, horizontal surface.
3. Remove the detachable water tank and fill it,
making sure not to pass the level mark.
4. Fit the water tank back onto the steam tank.
5. Unwind the mains cable fully and plug it into an
earthed socket.
6. Set the boiler «Start/Stop» button (4) and main
power «On/Off» button (8) switches to the
«Start/On» position.
7. The green «steam ready» indicator lamp (3) will
light up after approximately 5 minutes, indicating
that the appliance is ready to use.
8. This appliance has a built-in water level sensor.
The red «refill water tank» indicator (10) will light
when the water tank is empty.
12
All manuals and user guides at all-guides.com
Important:
• Normal tap water can be used.
• The water tank can be filled at any time while
• To avoid damage and/or contamination of the
• The iron pad (2) can be placed into the specially
• During it first use the iron may produce certain
• While the steam release button is pressed, the

Setting the temperature

1. Check the ironing instruction label on the garment
2. Select the temperature (15)
3. The indicator lamp (16) will remain lit while the
Tips:
• Sort your garments out based on their cleaning
• If you are not sure what the garment is made
To prolong the optimum steam function, mix tap
water with distilled water 1:1. If the tap water
in your district is very hard, mix tap water with
distilled water 1:2.
You can inquire about the water hardness with
your local water supplier.
using the appliance.
water tank, do not put perfume, vinegar, starch,
descaling agents, additives or any other type of
chemical product into the water tank.
designed recess on the appliance or somewhere
suitable alongside the ironing area.
Never rest the iron on the appliance without the
iron pad!.
vapours and odours, along with white particles
on the soleplate, this is normal and it will stop
after a few minutes
water tank may produce a pumping sound, this
is normal, indicating that water is being pumped
to the steam tank.
to determine the correct ironing temperature.
«•» Synthetics
«••» Silk – Wool
«•••» Cotton – Linen
iron is heating and go out as soon as the iron has
reached the selected temperature.
symbol labels, always starting with clothes that
have to be ironed at the lowest temperatures.
of then begin ironing at a low temperature and
decide on the correct temperature by ironing a
small section not usually seen when worn