Before Using Your Appliance For The First Time; Setting The Temperature; Filling The Water Tank - Bosch Sensixx’x DI90 MotorSteam Gebrauchsanleitung

Before using your appliance
for the first time
Remove any labels or protective
ℹ ℹ
covering from the soleplate (13).
For further details on the following actions,
please refer to the related chapters in this user
manual.
1. With the iron unplugged, fill the tank (11) of the
iron with tap water and set the temperature
control (15) to "max".
2. Plug in the appliance to the mains.
While the soleplate is heating up or cooling
ℹ ℹ
down to the selected temperature, the
lights inside the temperature control will
flash. When the selected temperature is
reached, the lights will stop flashing and
remain lit continuously.
3. Then, the green light (5) goes on. Grip the
handle (1) and set the steam control to the
maximum position "max".
4. Hold the iron horizontally and repeatedly press
the shot of steam button (6). Some residue
may come out of the soleplate.
☞ ❐
When using the steam function for the first
time, do not use it on your laundry, as there
may still be dirt in the steam dispenser.
☞ ❐
If necessary, carefully clean the soleplate
down with a dry, folded cotton cloth.
When turned on for the first time, your new
ℹ ℹ
iron may smell and emit a little smoke and
a few particles; this will stop after a few
minutes.
1
Filling the water tank
E E Unplug the iron from the mains!
1. Open the water inlet lid (9).
Never fill beyond the level mark for
ℹ ℹ
maximum filling (12).
2. Close the water inlet lid.
Use only clean water from the tap without
mixing anything with it. The addition of other
liquids, (unless recommended by Bosch) such
as perfume, will damage the appliance.
Any damage caused by the use of the
ℹ ℹ
aforemen tioned products will make the
guarantee void.
☞ ❐
Do not use condensation water from
tumble dryers, air conditioning systems or
18
B O SC H
similar. This appliance has been designed
to use normal tap water.
☞ ❐
To prolong the optimum steam function,
you may mix tap water with distilled water
1:1. If the tap water in your district is very
hard, mix tap water with distilled water 1:2.
You can inquire about the water hardness with
your local water supplier.
Setting the
2
temperature
The temperature control (15) adjusts the
ℹ ℹ
temperature of the soleplate (13).
☞ ❐
Check the temperature instructions shown
on the care label of the garment you are
ironing.
1. Set the temperature control (15) to the
corresponding position by lining it up with the
temperature index (14) on the iron.
Temperature
●
●●
●●●
max
i-Temp Advanced* any type of fabric which
AntiShine*
* model dependent
"TempOK" indicator
While the soleplate is heating up or cooling
ℹ ℹ
down to the selected temperature, the
"TempOK" lights inside the temperature
control (15) will flash. When the selected
temperature is reached, the lights will stop
flashing and remain lit continuously.
"i-Temp advanced" function
(model dependent)
This compact steam generator has a unique
"i-Temp Advanced" function.
If this function is selected, an appropriate
combination of temperature and steam is set
which is suitable for all fabrics that can be ironed.
Suitable for :
synthetics
silk – wool
cotton
linen
can be ironed
dark and delicate fabrics.
Reduces the risk of shiny
marks.