Connection Diagrams; Commissioning; Servicing - Stahl 8562/5 Betriebsanleitung

8.3 Connection diagrams

Schematic
2
1
07614E00
1 pole
2 4 6 N
1 3 5 N
07610E00
3 pole + N
08
98
95 05
12218E00
Auxiliary contact 1 NO
Fault indication contact 1 NO
Connect the device according to the rating plate. It has to be taken care that the neutral
conductor is connected correctly.
9

Commissioning

Before commissioning, ensure that:
the device has been installed in accordance with the standards,
the connections have been correctly made,
the device is not damaged,
all screws and nuts are fully tightened.

10 Servicing

10.1 Maintenance
Maintenance and repair work on the devicess may only be carried out by appropriately
authorized and trained personnel.
Before any work commences, the devices must be disconnected from the supply.
Observe the relevant national regulations in the country of use!
The following items must be checked as part of the maintenance schedule:
Check that no cable connections are loose.
Check the plastic enclosure for cracks or other visible signs of damage.
Check that the permitted temperatures, in accordance with IEC/EN 60079-0, are
adhered to.
Check the reset function of the switch lever.
Check that the device functions correctly.
149909 / 8562604300
2010-06-01·BA00·III·en·04
2 N
1 N
07613E00
1 pole + N
2 4 6 8
1 3 5 7
11537E00
4 pole
96 98 06 08
95 05
12219E00
Auxiliary contact 1 CO
Fault indication contact 1 CO
2 4
1 3
07612E00
2 pole
96 98
95
11536E00
Auxiliary contact 1 CO
U>
C1
C2
12220E00
Remote trip
Miniature Circuit Breaker
8562/5
Commissioning
2 4 6
1 3 5
07611E00
3 pole
06 08
05
07618E00
Fault indication contact 1 CO
U<
D1 D2
12221E00
Undervoltage trip
11