Call Function; Automatic Call Acceptance - Silvercrest SBTF 10 C2 Bedienungsanleitung

All manuals and user guides at all-guides.com
Note:
GB
The sound quality of the hands-free set is heavily depend-
ent on where it is installed. Where possible, set up your
hands-free set so that the microphone 2 is pointing in
your direction.

Call function

●
Use your mobile telephone in the usual way to make a call.
●
For redialing of the last number called, shortly press
the multi-function button 6 twice.
●
For activation of voice dialling, shortly press the multi-
function button 6 once.
Note:
Voice dialing is only available with mobile telephones that
support this function. Further information regarding voice
dialing is to be found in the operating instructions for your
mobile telephone.
Accepting and ending a call
When you receive a call the LED status indicator 7 blinks
and you hear a call tone from the hands-free appliance.
If the call signal in your mobile phone is switched off , the
ringing tone is nonetheless sounded via the hands-free
appliance.
●
Press the multi-function button 6 shortly once,
to accept the call.
●
Press the multi-function button 6 shortly once,
to terminate the accepted call.
You can also accept and terminate the call over the
mobile telephone.

Automatic call acceptance

If automatic call acceptance is activated in the mobile tel-
ephone, it accepts the incoming call after a determined time
period and then passes it on to the hands-free appliance. Fur-
ther information regarding automatic call acceptance is to be
found in the operating instructions for your mobile telephone.
10
SBTF 10 C2