Using Your Appliance; Description Of The Control Panel - De Dietrich DHD771X Betriebsanleitung

EN

3 / USING YOUR APPLIANCE

DESCRIPTION OF CONTROL PANEL
•
A) Turns the LIGHTS off.
B) Turns the LIGHTS on.
C) reduces the motor speed until reaching
minimum. If pressed for about 2", it stops the
motor and storse the speed.
D) drives the motor (calling the last speed used)
and increases the speed until reaching maximum.
L Display:
- signals the running speed.
- signals the filter alarm (with motor off) by displaying the central segment for 30".
- signals Timer activation with a flashing number.
E) activates the TIMER (when the motor is running), so that the hood stops automatically after 5'. Also
Zero-sets hour metering when the Filter Alarm is active (motor OFF).
FILTER ALARM
Displayed for 30" when the motor is off:
After 30h of operation, the central segment lights up on the display; It indicates that the grease filters
need to be cleaned.
After 120h of operation, the central segment flashes on the display; It indicates that the grease filters
need to be cleaned and the charcoal filters replaced.
After cleaning the grease filters (and/or replacing the charcoal filters), restart the hour counter (RESET)
by pressing the key E during display of the filter alarm.
Tip
This guide to in stallation and use is val id for several mod el s. Minor differences i n
details and fittings may emerge between your appliance and the descriptions provided.
27
fig. 16