Electrical Connections - De Dietrich DHD771X Betriebsanleitung

EN
2 / INSTALLING YOUR APPLIANCE

ELECTRICAL CONNECTIONS

•
During installation and maintenance operations,
the appliance must be unplugged from the
electrical grid; fuses must be cut off or removed.
The electrical connections are made before the
appliance is installed in its housing.
Ensure that
- the electrical installation has sufficient voltage,
- the electrical wires are in good condition,
- the diameter of the wires complies with the
installation requirements.
Warning
This appliance must be grounded.
We can n o t b e h el d r esp o n si b l e fo r an y
ac c i d en t r esu l ti n g fr o m an i n ex i s ten t ,
defective or incorrect ground lead.
In case your appliance is not furnished with a non
separating flexible cable and has no plug, or has
not got any other device ensuring omnipolar
disconnection from the electricity main, with a
contact opening distance of at least 3mm, such
separating device ensuring disconnection from
the main must be included in the fixed installation.
This appliance is delivered with a H05VVF power
cord that has three-0.75mm
phase and ground). It must be connected to the
main power supply (which should be a 230-240V
single phase current) via a CEI60083
standardised socket that should remain
accessible after installation, in keeping with
installation guidelines.
If the power cable is damaged, call the after-sales
service department in order to avoid danger.
Warning
If th e el ect ri c al i n s tal l ati o n at y o u r
residence requires any changes in order to
h o o k u p y o u r ap p l i an c e, c al l u p o n a
professional electrician.
Warning
If the hood displays any malfunctions,
unp lu g the app li ance or remo ve the fuse
corresponding to the electrical socket where
your appliance is plugged in.
2
conductors (neutral,
23