Before Using The Appliance For The First Time; Symbols And Markings - Bosch ErgoMixx Style MS6 Serie Gebrauchsanleitung

Overview
X Fig. A
1 Universal cutter L *
a Container
b Fixing points for gear attachment H
c Universal blade (L)
d Ice crusher blade (L)
e Gear attachment
f Lid
2 Universal cutter XL *
a Container
b Fixing points for gear attachment H
c Universal blade (XL)
d Gear attachment
e Lid
3 Whisk *
a Gear attachment
4 "ProPuree" masher attachment *
a Gear attachment
b Masher paddle (detachable)
* Depending on the model
Before using the appliance
for the first time
Before the new accessory can be used,
it must be fully unpacked, cleaned and
checked.
Caution!
Never operate a damaged accessory!
■ Remove all accessories from the
packaging and dispose of all packing
materials.
■ Check that all the parts are present and
examine them for obvious damage.
X Fig. A
■ Thoroughly clean and dry all parts
before using for the first time.
X "Cleaning and maintenance" see
page 11

Symbols and markings

Symbol Meaning
Marking on the masher
paddle (X Fig. E).
Universal cutter
(size L and XL)
Warning!
Always observe the maximum quantities
and processing times in the table. X Fig. G
Universal cutter: For cutting meat,
hard cheese, onions, herbs, garlic, fruit,
vegetables, nuts, and almonds.
Ice crusher blade (only size L):
For crushing ice cubes (crushed ice).
Optimum processing quantity: 4-6 ice cubes.
Caution!
– Before cutting meat, remove gristle,
bones and sinews.
– The universal cutter is not suitable for
cutting very hard items (coffee beans,
radishes, nutmeg) and frozen food
(fruit etc.).
– Ice cubes should be processed only with
the ice crusher blade
X Fig. B
1. Place the container on a smooth, clean
work surface and press into position.
Insert the universal blade or ice crusher
blade.
Important: The blade must be positioned
straight in the container.
2. Add food.
3. Place the gear attachment on the
container and rotate clockwise until it
clicks into position.
4. Place the base unit on the gear attach-
ment and press until it clicks into position.
5. Plug the mains plug into the mains.
6. Hold the base unit and universal cutter
firmly. Press the Turbo button Â.
The appliance remains switched on as
long as the button is pressed.
7. Process the food with the universal cutter.
8. Release the button when the desired
consistency is reached. Wait until
the drive comes to a standstill.
Disconnect the mains plug.
9. Hold down both release buttons and
remove the base unit.
Overview en
9