Before Using For The First Time - Bosch MaxoMixx MSM8 Serie Gebrauchsanleitung

en Overview
Before use, read these instructions
carefully in order to become familiar
with important safety and operating
instructions for this appliance. Please
keep the operating instructions in a safe
place.
If passing on the appliance to a third party,
always include the operating instructions.
Overview
X Fig. A
1 Universal cutter L *
a Container
b Universal blade (L)
c Ice crusher blade (L)
d Gear attachment
e Lid
2 Universal cutter XL *
a Container
b Universal blade (XL)
c Gear attachment
d Lid
3 Whisk *
a Gear attachment
* depending on the model
Before using for the first
time
Before the new accessory can be used,
it must be fully unpacked, cleaned and
checked.
Warning!
Never operate a damaged accessory!
■ Remove all accessories from the
packaging and dispose of all packing
materials.
■ Check that all parts are present and
examine them for obvious damage.
X Fig. A
■ Thoroughly clean and dry all parts

before using for the first time.

X "Cleaning and maintenance" see
page 10
8
Universal cutter
(size L and XL)
Warning!
Always observe the maximum quantities
and processing times in the table.
X Table E
Universal blade: For cutting up meat,
hard cheese, onions, herbs, garlic, fruit,
vegetables, nuts and almonds.
Ice crusher blade (only size L):
For crushing ice cubes (crushed ice).
Optimum processing quantity: 4-6 ice cubes
(max. 100 g).
Warning!
– Before cutting up meat, remove gristle,
bones and sinews.
– The universal cutter is not suitable
for cutting up very hard items (coffee
beans, radishes, nutmeg) and frozen
food (fruit etc.).
– Ice cubes should be processed only with
the ice crusher blade
X Fig. B
1. Place the container on a smooth, clean
work surface and press into position.
Insert the universal blade or ice crusher
blade.
Important: The blade must be positioned
straight in the container.
2. Add food.
3. Place the gear attachment on the
container and rotate clockwise until it
clicks into position.
4. Place the base unit on the gear
attachment and press until it clicks into
position.
5. Insert the mains plug.
6. Hold the base unit and universal cutter
firmly. Press Turbo button Â. The
appliance remains switched on as long
as the button is pressed.
7. Process the food with the universal
cutter.
8. Release the button after processing.
Wait until the drive comes to a standstill.
Disconnect the mains plug.