Stopwatch Function; Automatic Safety Cut-Out; Keep Warm Function; Switching On The Keep Warm Function - NEFF T16TS7KN-Serie Gebrauchsanleitung

Automatic safety cut-out

en
Setting the kitchen timer
Touch the symbol. The display
U
1.
symbol flashes. min lights up in the timer display.
‹‹
Use the twist knob to set the desired cooking time.
2.
The timer starts counting down after a few seconds.
When the time has elapsed
When the time has elapsed, an audible signal sounds
and flashes in the display for one minute. The
‹‹
display above the symbol lights up. Touch any
U
symbol. The displays go out and the audible signal
ceases.
Setting the correct time
Touch the symbol and use the twist knob to change
U
the time.

Stopwatch function

The stopwatch function displays the time that has
passed since activating the function.
The stopwatch function only works when the hob is
switched on. When the hob is switched off, the
stopwatch function is switched off as well.
The stopwatch function is switched on by touching the
symbol. appears in the timer display and timing
œ ‹‹
starts. Seconds are displayed during the first minute,
and then minutes.
The stopwatch function is switched off by touching the
symbol again. The timer display goes out.
œ
Note: If another time-setting option is selected in
addition to the stopwatch function, the setting appears
in the timer display for 10 seconds. The stopwatch
function is then displayed again.
bAutomatic safety cut-out
I f a hotplate has been switched on for a long time
A u t o m a t i c s a f e t y c u t - o u t
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating.
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).
60
above the
A U
A
and the / residual
"‰ • œ
zKeep warm function
T he Keep warm function is suitable for melting
K e e p w a r m f u n c t i o n
chocolate or butter and for warming food and cookware

Switching on the Keep warm function

Select the hotplate.
1.
Touch the symbol.
–
2.
display.
The Keep warm function is switched on.

Switching off the Keep warm function

Select the hotplate.
1.
Touch the symbol.
–
2.
display.
The Keep warm function is switched off.
[Energy consumption
indicator
Y ou can use this function to have the total energy
E n e r g y c o n s u m p t i o n i n d i c a t o r
consumption between switching the hob on and off
displayed.
Once switched off, the consumption in kilowatt hours
(e.g. 1.87 kWh) is displayed for 10 seconds
The accuracy of the display depends, amongst other
things, on the voltage quality of the power supply.
The display has not been activated. You can find out
how to activate the display in the Basic settings
section.~ Page 61
lights up on the heat setting
–
lights up on the heat setting
‹