Control Display; Sound Emitted By The Beertender Appliance; Dispensing Beer - Krups BeerTender VB700E00 Bedienungsanleitung

Control display

Your appliance features a large display providing you
with important and useful information.
On the left side of the display:
a. Volume indicator
The BeerTender Keg volume is indicated with 4
levels. The 4 levels are visible when the keg is full.
They disappear progressively while emptying the keg.
The last level starts to blink when only two glasses
of beer (+ / - one) are left in the keg. This gives you
the possibility to prepare in advance a new keg to be
insereted in the appliance.
b. Temperature indicator
The temperature indicator goes from red, for a beer
which is too warm, to orange when cooling of the
beer is almost complete. The perfect draught beer
temperature is attained when the indicator is green.
Warning: never use your BeerTender with ambient
temperature above 30°C. Above that level, the 3°C set
regulation temperature can not be attained and the
temperature indicator will never reach the green level.

Sound emitted by the BeerTender appliance

The cooling function of the BeerTender produces sound.
The BeerTender features a cooling system which
controls the temperature of the BeerTender Keg. There
are two cooling modes:
1. Stand-by cooling, which is used in normal
operating conditions. In this mode the cooling fan
produces a barely audible noise;
2. Active cooling, which is triggered when temperature
inside the cooling chamber is too high. As soon as the
cooling chamber reaches the right temperature, the
appliance will switch back into the stand-by mode.
7

Dispensing beer

Note: always check the "best before end" date shown
at the bottom of the BeerTender Keg. Do not use the
BeerTender Keg beyond this date.
Note: the beer must be dispensed into suitable
containers; the dispensing funtion is started and
stopped manually by the user.
14