Cleaning - WAGNER W 990 FLEXIO Originalbetriebsanleitung

GB D

20. Cleaning

Proper cleaning is the prerequisite for
problem-free operation of the paint
application device. No warranty claims are
accepted in case of improper or no cleaning.
We recommend using warm and
i
soapy water for cleaning purposes.
Attention! Do not pour any
liquids over the basic unit.
•
Turn the machine off (position 0).
•
Put the end of the suction hose into a bucket
of water. (Fig. 22)
•
Press the hook (Fig. 23 "click") slightly
downwards.Turn the spray attachment and
turbine unit towards each other and detach.
Attention! Disconnect the power
plug from the turbine unit. Do not
put the turbine unit anywhere
near liquids. Never dip the
turbine unit into liquids. Clean the
housing only with a moistened
cloth.
•
Important: The material flow limiter must
be set to 12 in order for the stop to be
able to move out.
Pull the trigger backwards (fig. 24, 1) and
move out the stop (2).
•
Hook the spray attachment plus fixture (fig.
25, 3) into the paint container so that the
nozzle is pointing into the container.
•
Switch on the device (position I) and pump
paint out of the hose back into the container
until water emerges.
•
Turn the machine off (position 0).
•
Remove the suction filter at the end of
the suction hose and clean thoroughly in
running water.
•
Reattach the suction filter once it is clean.
•
Put the end of the suction hose into a bucket
of water.
46 46
W 990 Flexio W 990 Flexio
click
1
2