vidaXL 50762 Bedienungs- Und Sicherheitshinweise Seite 21

unit will operate at this temperature all the time; Sleep function
is not available for fan mode, drying mode and auto mode. If
sleep function is started up, the upper indicator will keep the
display status. Others, it won't be displayed.
6.2 Buttons on remote controller
See image 40
1 ON/OFF button
2 Mode button
3 +/- button
4 FAN button
5 Button 5
6 Button 6
7 Health/Save button
6.3 Introduction for icons on display screen
See image 41
1 Air mode
2 Child Lock
3 Sleep mode
4 Light
5 Up and down swing
6 Left and right swing
7 Set time
8 Timer On/Timer Off
9 Turbo mode
10 Set temperature
11 X-fan
12 Health mode
6.4 Introduction for buttons on remote controller
1-1
5 Note
• This is a general use remote controller, it could be used for
the air conditioners with multifunction; For some function,
which the model doesn't have, if press the corresponding
button on the remote controller that the unit will keep the
original running status.
• After putting through power, air conditioner will give out a
sound and operation indicator [1-1] is ON (red indicator, the
colour is different for different models). You can operate
the air conditioner through the remote controller.
• At ON status, after each pressing button on remote
8 X-FAN button
Note: X-FAN is same
with BLOW.
9 TEMP button
10 TIMER button
11 TURBO button
12 SLEEP button
13 LIGHT button
13 Send signal
14 Set fan speed
Operation mode
15 Auto mode
16 Cool mode
17 Dry mode
18 Fan mode
19 Heat mode
Temp. display type
20 Set temp.
21 Indoor ambient temp.
22 Outdoor ambient temp.
1-2
controller, the signal icon [1-2] on remote controller will
flash once. Air conditioner will give out a sound, which
indicates the signal has been sent to air conditioner.
• At OFF status, display screen on remote controller displays
set temperature. At on status, display screen on remote
controller displays the corresponding startup function's
icon.
1. ON/OFF button
Press this button to turn on the unit. Press this button again to
turn off the unit.
2. Mode button
Press this button can select your required operation mode.
See image 42
Button 5
Cool
• After selecting auto mode, air conditioner will operate
automatically according to ambient temperature. Set
temperature can't be adjusted and also can't be displayed.
Press "FAN" button can adjust fan speed. Press "Button 5"
can adjust swing angle.
• After selecting cool mode, air conditioner operates under
cool mode. Cool mode indicator "Cool" on indoor unit is ON
(This indicator is not available for some models). You can
press "+" or "-" button to adjust set temperature. Press
"FAN" button can adjust fan speed. Press "Button 5" can
adjust swing angle.
• After selecting dry mode, air conditioner operates under
dry mode at low speed. Dry mode indicator "Dry" on indoor
unit is ON (This indicator is not available for some models).
Under dry mode, fan speed can't be adjusted. Press "Button
5" to adjust swing angle.
• After selecting fan mode, air conditioner operates only
under fan mode, All mode indicators on indoor unit is OFF.
Operation indicator is ON.(This indicator is not available for
some models). Press "FAN" button can adjust fan speed.
Press "Button 5" to adjust swing angle.
• After selecting heat mode, air conditioner operates under
heat mode. Heat mode indicator "Heat" on indoor unit is
ON (This indicator is not available for some models). You
can press "+" or "-" button to adjust set temperature. Press
"FAN" button to adjust fan speed. Press "Button 5" to adjust
swing angle. (Cooling only unit can't receive the signal for
heating mode.)
5 Note: For preventing cold wind, after starting up heating
mode, indoor fan will blow fan after delaying 1-5 min. (Details
time is decided by indoor ambient temperature) Temperature
setting range on remote controller: 16°C -30°C . Fan speed
setting range: auto, low speed, medium speed and high speed.
3. "+" or "-" button
• After each pressing of "+" or "-" button, it can increase or
decrease set temperature 1°C. Hold "+" or "-" button, 2s
Dry
Heat
EN___User manual | 21