Operator Controls - Enraf Nonius Radarmed 950+ Gebrauchsanweisung

ENGLISH

8 Operator controls

8.1 Operator controls
[1] Program retrieve key
Key to retrieve parameter settings from the memory.
[2] Program store key
Key to store parameter settings in the memory.
[3] Program key protocols
Key to retrieve parameter settings from the protocolmemory (grouped in clusters).
[4] Display parameter selectors
Keys for selecting adjustable parameters in the dis-play.
[5] Stop key
Key to end a treatment premature. After operationof this button the treatment time runs down to zero,
a sound signal is audible and the HF-power is shut off.
[6] Return key
Key for cancelling a choice and/or activating the previous display at programs and protocol settings.
[7] Accept key
Key for confirming a choice and/or activating the next display.
[8] Central control
Regulator for adjusting parameters.
[9] Therapy mode continuous (C) or pulsed microwave (P)
The unit automatically switches to continuous mode when switched on or at the end of treatment. It is
possible to switch from continuous to pulsed mode and visa versa during treatment.
[10] Clock
Page 13 of 26
081-400-095-4A_950+_EN