Carrier XCT7 Installations- Und Benutzerhandbuch Seite 17

Installation Instruction
Place without the air-inlet hole.
Note:
a. Set a 500~1000mm bracket
b. Air outlet height HD=H-h and below 1m
4. The outdoor machine should be installed after taking in to account the impact of seasonal winds. The wind should
not blow directly into the unit, or else it will affect the unit defrosting and related functions.
5. Follow these recommendations if the unit is installed with an exhaust duct:
• Install the exhaust duct before the machine is taken out of the wind protection network to avoid affecting the
output of the unit and its performance or cause failure.
• The exhaust duct should have only one elbow, or else it will affect the operation of the machine.
• Please install a soft connection between the unit and the air duct to prevent vibration and noise.
• The exhaust air duct of each machine must be installed independently. To prevent the failure of the unit, avoid
assembling the exhaust hood of the machine parallelly in any form.
10
External
air duct